In aerospace, electronics, automotive, biomedical industries.
In STTAi, we specialised in offering service support and solutions to our clients coupled with a wide range of products ranging from Ovens, Deep Cooling Chillers to Environmental Test Chambers in the aerospace, electronics, automotive, biomedical industries.
The comemso Analyzer / Simulator solutions measure and verify both the communication and the load circuit on standard-conformity over the complete duration of charging and records all deviations. Thus causes of charge interruptions can be identified and causalities of events can be detected and visualised.
The comemso EVCA Multi Mobile is an absolute world novelty in the field of EV charging system analysis. It combines the four most common charging standards AC/DC-CCS Type 1 + Type 2, CHAdeMO and GB/T China in one system. Directly ready for use without prior plugging and replacing of inlets or similar! All this is done in accordance with the latest standards. For DC-CCS Type 1 + Type 2: IEC 61851-1, DIN 70121, ISO 15118 and SAE J1772; ISO/IEC 61851-23 measurement and ISO/IEC 61851-24 without faults on DC load circuit. For CHAdeMO: 0.9.1, 1.0, 1.0.1, 1.1, 1.2 and 2.0. For GB/T DC (China): GB/T 27930-2011; GB/T 27930-2015 and GB/T 18487.1-2015.
The AC analysis is performed according to IEC 61851-1, SAE J1772 and GB/T 18487.1-2015 Annex A (AC). The DC analysis is performed according to IEC 61851-1, DIN 70121, ISO 15118, SAE J1772 and IEC 61851-23 Annex CC.
The combined Mini-Charger-Tester simulates vehicle signals of the charging standards DC-CCS and CHAdeMO, virtually two vehicles in an ultraportable suitcase.
This small power package can be used at the service application and maintenance.